Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR COOLING UNIT › 2019.02–2019.06
RM35X0E _58 Vehicle Interior _079316 HEATING / AIR CONDITIONING _0384876 REAR COOLING UNIT A

HEATING / AIR CONDITIONING  REAR COOLING UNIT  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 88539K 3.REMOVE DRAIN COOLER HOSE

a.

for Standard Roof:

i.
E400972

Disconnect each drain cooler hose.



b.

for High Roof:

i.
E400973

Disconnect each drain cooler hose.



Hide 88539C 4.REMOVE NO. 2 COOLER UNIT DRAIN HOSE

a.

for Standard Roof:

i.
E400974

Disconnect each No. 2 cooler unit drain hose.



b.

for High Roof:

i.
E400975

Disconnect each No. 2 cooler unit drain hose.



Hide 87030A 5.REMOVE REAR COOLING UNIT ASSEMBLY

a.

for Standard Roof:

i.
E400976

Remove the cooling unit parts.



b.

for High Roof:

i.
E415126

Remove the cooling unit parts.



c.
E415127C01
0.719,1.271 1.219,1.271 true 1.927,1.302 2.427,1.302 true 0.469,1.177 0.708,1.354 0.24,0.177 10 true *1 2.521,1.208 2.729,1.385 0.208,0.177 10 true *2
*1 Cooler Refrigerant Liquid Pipe D
*2 Cooler Refrigerant Suction Pipe D


for Standard Roof:

i.

Remove the 2 bolts.


ii.

Disconnect the cooler refrigerant liquid pipe D and cooler refrigerant suction pipe D.



d.
E415128C01
1.927,0.927 2.333,0.927 true 1.625,1.802 1.938,1.802 1.938,1.802 2.042,1.521 true 1.438,1.729 1.635,1.896 0.198,0.167 10 true *1 2.323,0.833 2.583,1.021 0.26,0.188 10 true *2
*1 Cooler Refrigerant Liquid Pipe D
*2 Cooler Refrigerant Suction Pipe D


for High Roof:

i.

Using a double wrench, remove the union nuts and disconnect the cooler refrigerant liquid pipe D and cooler refrigerant suction pipe D.



e.

Remove the O-ring from the cooler refrigerant liquid pipe D and cooler refrigerant suction pipe D.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.



f.

for Standard Roof:

i.

Disconnect each connector.

E415155


ii.

Detach each clamp and remove the vehicle wire harness.


iii.

While supporting the rear cooling unit assembly to prevent it from falling, remove the 6 bolts. Then, while moving the rear cooling unit assembly in the direction indicated by the arrow shown in the illustration, remove the front mounting position from the vehicle roof reinforcement and remove the rear cooling unit assembly.

E415129C01
0,0 0,0 false
V113147

Remove in this Direction - -




g.

for High Roof:

i.

Disconnect each connector.

E415156


ii.

Detach each clamp and remove the vehicle wire harness.


iii.

While supporting the rear cooling unit assembly to prevent it from falling, remove the 6 bolts. Then, while moving the rear cooling unit assembly in the direction indicated by the arrow shown in the illustration, remove the front mounting position from the vehicle roof reinforcement and remove the rear cooling unit assembly.

E415130C01
0,0 0,0 false
V113147

Remove in this Direction - -