12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Cover)
16361A
2.REMOVE FAN AND GENERATOR V BELT
3.DRAIN POWER STEERING FLUID
44348D
4.DISCONNECT NO. 2 RESERVOIR TO PUMP HOSE
Slide the hose clamp and disconnect the No. 2 reservoir to pump hose.
Drain the power steering fluid.
44410
5.DISCONNECT PRESSURE FEED TUBE ASSEMBLY
Disconnect the power steering oil pressure switch connector from the power steering oil pressure switch.
Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.
Remove the gasket from the pressure feed tube assembly.
44320
6.REMOVE VANE PUMP ASSEMBLY
Remove the 2 bolts and vane pump assembly.