Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Separate Seat Type) › 2019.02–2019.06
RM35X0E _58 Vehicle Interior _078602 SEAT BELT _0389611 OCCUPANT DETECTION SENSOR(for Separate Seat Type) A

SEAT BELT  OCCUPANT DETECTION SENSOR(for Separate Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71511A 1.INSTALL FRONT SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR)

HINT:

When installing the front seat cushion cover sub-assembly RH, refer to the Precaution section in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>PRECAUTION


a.
B542070

Attach the hook and install the front seat cushion cover sub-assembly RH to the front seat cushion pad RH (occupant detection sensor).

NOTICE:

Be careful not to damage the front seat cushion cover sub-assembly RH.



b.
B542068C01
0.781,1.74 1.646,1.531 true 0.573,1.604 0.74,1.781 0.167,0.177 10 false *a
*a Band
V113147

Install in this Direction


Attach the band.


Hide 2.INSTALL FRONT SEAT CUSHION COVER WITH PAD

a.

Attach the hook and install the front seat cushion cover with pad.

B542072


b.
B542073

Attach the hook.


c.
B532654

Attach the claw.


Hide 71861K 4.INSTALL FRONT SEAT INNER CUSHION SHIELD RH

Hide 71811T 5.INSTALL FRONT SEAT CUSHION SHIELD RH

Hide 72525M 6.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REASSEMBLY


Hide 72551K 7.INSTALL RECLINING HINGE COVER RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REASSEMBLY


Hide 71130B 8.INSTALL FRONT SEAT LEG ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REASSEMBLY


Hide 71139M 9.INSTALL FRONT SEAT OUTER LEG COVER RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REASSEMBLY


Hide 71139N 10.INSTALL FRONT SEAT INNER LEG COVER RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REASSEMBLY


Hide 11.INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>INSTALLATION


Hide 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

Hide 13. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Front Seat Side Airbag)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 16.INSPECT SEAT BELT WARNING SYSTEM