89111
1.INSTALL NETWORK GATEWAY ECU
for LHD:
Connect the connector and install the network gateway ECU.
Attach the guide and connect the network gateway ECU to the instrument panel reinforcement assembly.
Install the nut.
for RHD:
Connect the connector and install the network gateway ECU.
Attach the guide and connect the network gateway ECU to the instrument panel reinforcement assembly.
Install the nut.
86792C
2.INSTALL PARKING ASSIST ECU (w/ Panoramic View Monitor System)
88051B
3.INSTALL NO. 1 ION GENERATOR SUB-ASSEMBLY (w/ Ion Generator)
83100
4.INSTALL COMBINATION METER ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
for 7GR-FKS:
for 1GD-FTV:
6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART