To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Cover)
17940D
2.REMOVE INTERCOOLER ASSEMBLY (for Water Cooled Type Intercooler)
25804
3.REMOVE VACUUM CONTROL VALVE SET
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Detach the clamp and disconnect the connector from the vacuum control valve set.
Remove the bolt and disconnect the engine wire bracket.
for Single Actuator EGR Bypass Valve:
Disconnect the connector from the vacuum control valve set.
for Double Actuator EGR Bypass Valve:
Disconnect the 2 connectors from the vacuum control valve set.
for Single Actuator EGR Bypass Valve:
Disconnect the 2 vacuum hoses from the vacuum control valve set and No. 2 EGR valve assembly.
for Double Actuator EGR Bypass Valve:
Disconnect the 3 vacuum hoses from the vacuum control valve set and No. 2 EGR valve assembly.
| *A | for Single Actuator EGR Bypass Valve |
| *B | for Double Actuator EGR Bypass Valve |
Remove the 2 bolts and vacuum control valve set from the intake manifold.
| *A | for Single Actuator EGR Bypass Valve |
| *B | for Double Actuator EGR Bypass Valve |
Disconnect the No. 3 vacuum transmitting hose from the vacuum control valve set.
for Double Actuator EGR Bypass Valve:
Disconnect the No. 4 vacuum transmitting hose from the No. 1 vacuum switching valve assembly.
25860
4.REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
for Single Actuator EGR Bypass Valve:
Disconnect the vacuum hose from the No. 1 vacuum switching valve assembly.
for Double Actuator EGR Bypass Valve:
Remove the 2 vacuum hoses from the 2 No. 1 vacuum switching valve assemblies.
for Single Actuator EGR Bypass Valve:
Remove the screw and No. 1 vacuum switching valve assembly from the bracket.
for Double Actuator EGR Bypass Valve:
Remove the 2 screws and 2 No. 1 vacuum switching valve assemblies from the bracket.
25894
5.REMOVE NO. 1 FILTER
Remove the No. 1 filter from the No. 1 vacuum switching valve assembly.