51406A
1.REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY
52618
2.REMOVE LOWER FRONT BUMPER ABSORBER
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE COOLANT
5.DRAIN ENGINE COOLANT (for Intercooler)
12601B
6.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
16553D
7.DISCONNECT NO. 3 INTERCOOLER COOLING WATER HOSE
| *1 | No. 3 Intercooler Cooling Water Hose |
| *2 | No. 3 Intercooler Cooling Water Pipe |
Slide the hose clamp and disconnect the No. 3 intercooler cooling water hose from the No. 3 intercooler cooling water pipe.
16551C
8.DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE
Slide the hose clamp and disconnect the No. 1 intercooler cooling water hose from the intercooler assembly.
9.REMOVE NO. 2 INTERCOOLER COOLING WATER PIPE ASSEMBLY
| *1 | No. 5 Intercooler Cooling Water Hose |
| *2 | No. 3 Intercooler Cooling Water Pipe |
Slide the hose clamp and disconnect the No. 5 intercooler cooling water hose from the intercooler assembly.
Remove the bolt and No. 2 intercooler cooling water pipe assembly.
Slide the hose clamp and remove the No. 5 intercooler cooling water hose from the No. 3 intercooler cooling water pipe.
17360E
10.REMOVE NO. 1 AIR TUBE ASSEMBLY
| *a | Retainer |
Release the 2 retainers and disconnect the No. 1 air tube assembly from the intercooler assembly and compressor outlet elbow as shown in the illustration.
17030
11.REMOVE AIR HOSE ASSEMBLY
| *a | Retainer |
Release the 2 retainers and disconnect the air hose assembly from the intercooler assembly and intake air connector as shown in the illustration.
16278
12.REMOVE NO. 2 WATER BY-PASS PIPE
| *1 | No. 2 Water By-pass Pipe |
| *2 | No. 13 Water By-pass Hose |
| *3 | No. 15 Water By-pass Hose |
| *4 | No. 18 Water By-pass Hose |
| *5 | Heater Hose |
| *6 | No. 16 Water By-pass Hose |
Slide the hose clamp and disconnect the No. 13 water by-pass hose from the No. 2 water by-pass pipe.
Slide the hose clamp and disconnect the No. 15 water by-pass hose from the water by-pass pipe.
Slide the hose clamp and disconnect the No. 18 water by-pass hose from the EGR pipe with cooler sub-assembly.
Slide the 2 hose clamps and disconnect the 2 heater hoses from the No. 2 water by-pass pipe.
Slide the hose clamp and disconnect the No. 16 water by-pass hose from the No. 1 EGR cooler.
Remove the 3 bolts and No. 2 water by-pass pipe.
17940D
13.REMOVE INTERCOOLER ASSEMBLY
Disconnect the engine coolant temperature sensor (for Intercooler) connector and clamp.
Disconnect the intake air temperature sensor (for Intercooler) connector.
Remove the bolt and disconnect the wire harness protector and exhaust sensor clamp bracket from the intercooler assembly.
Remove the 4 bolts and intercooler assembly.
89424D
14.REMOVE INTAKE AIR TEMPERATURE SENSOR (for Intercooler)
89422P
15.REMOVE ENGINE COOLANT TEMPERATURE SENSOR (for Intercooler)