25894
1.INSTALL NO. 1 FILTER
Install the No. 1 filter to the No. 1 vacuum switching valve assembly.
25860
2.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
for Double Actuator EGR Bypass Valve:
Install the 2 No. 1 vacuum switching valve assemblies to the bracket with the 2 screws.
for Single Actuator EGR Bypass Valve:
Install the No. 1 vacuum switching valve assembly to the bracket with the screw.
for Double Actuator EGR Bypass Valve:
Install the 2 vacuum hoses to the 2 No. 1 vacuum switching valve assemblies.
for Single Actuator EGR Bypass Valve:
Connect the vacuum hose to the No. 1 vacuum switching valve assembly.
25804
3.INSTALL VACUUM CONTROL VALVE SET
for Double Actuator EGR Bypass valve:
Connect the No. 4 vacuum transmitting hose to the No. 1 vacuum switching valve assembly.
Connect the No. 3 vacuum transmitting hose to the vacuum control valve set.
Install the vacuum control valve set to the intake manifold with the 2 bolts.
for Double Actuator EGR Bypass Valve:
Connect the 3 vacuum hoses to the vacuum control valve set and No. 2 EGR valve assembly.
for Single Actuator EGR Bypass Valve:
Connect the 2 vacuum hoses to the vacuum control valve set and No. 2 EGR valve assembly.
for Double Actuator EGR Bypass Valve:
Connect the 2 connectors to the vacuum control valve set.
for Single Actuator EGR Bypass Valve:
Connect the connector to the vacuum control valve set.
Connect the engine wire bracket with the bolt.
Attach the clamp and connect the connector to the vacuum control valve set.
17940D
4.INSTALL INTERCOOLER ASSEMBLY (for Water Cooled Type Intercooler)
12601B
5.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Cover)