Home › Engine / Hybrid System › 1GD-FTV (INTAKE / EXHAUST) › WATER PUMP (for Water Cooled Type Intercooler) › from 2020.05
RM35X0E _51 Engine / Hybrid System _079307 1GD-FTV INTAKE / EXHAUST _0415317 WATER PUMP(for Water Cooled Type Intercooler) A

1GD-FTV INTAKE / EXHAUST  WATER PUMP(for Water Cooled Type Intercooler)  INSTALLATION  


PROCEDURE

Hide 161B0 1.INSTALL ELECTRIC WATER PUMP ASSEMBLY

a.

Install the electric water pump assembly to the fan shroud with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the connector.


c.

Connect the No. 2 intercooler cooling water hose to the electric water pump assembly and slide the hose clamp to secure the hose.


d.

Connect the No. 1 intercooler cooling water hose to the electric water pump assembly and slide the hose clamp to secure the hose.


Hide 51405A 4.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52618 5.INSTALL LOWER FRONT BUMPER ABSORBER

Hide 51406A 6.INSTALL NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY