2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Current Position Display does not Appear

Circuit diagnosis · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check if a map disc is inserted into the map disc slot.

    OK:
    A map disc is inserted.



NG
INSERT MAP DISC IN MAP SIDE SLOT
OK


2. CHECK MAP DISC

  1. I100152E12
    Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Vehicle Position Mark is not Updated (from Jul 2012)Current Position Display does not Appear (Aug 2008 – Jun 2010) →