Vehicle Position Mark is not Updated
Circuit diagnosis · Vehicles built from Jul 2012
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 Jul 2010 – Jun 2012 from Jul 2012
INSPECTION PROCEDURE
| 1. CHECK MAP DISC |
 |
- Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on the map disc
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK NAVIGATION DISPLAY |
 |
Check if touch scrolling can be performed on the map display.
- OK:
- Touch scrolling can be performed.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| 3. CHECK VEHICLE SENSOR (OPERATION CHECK) |
 |
- Enter the "Vehicle Sensors" screen (Check GPS&Vehicle Sensors) (Click here).
While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.
- OK:
- The readings are almost equal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|