Current Position Display does not Appear
Circuit diagnosis · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK NAVIGATION RECEIVER ASSEMBLY |
 |
Enter the "LOAD EJECT" screen.
Check if a map disc is inserted into the map disc slot.
- Check if "DISC IN" is on.
- Result:
Result
|
Proceed to
|
"DISC IN" is on.
|
A
|
"DISC IN" is off.
|
B
|
Text in Illustration
*a
|
Example
|
|
B |
 |
|
| INSERT MAP DISC IN MAP DISC SLOT |
|
|
| A |
|
 |
|
| 2. CHECK MAP DISC |
 |
- Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on the map disc
|
NG |
 |
|
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|