2007-2013 Highlander Kluger · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

CAUTION:
  1. Be sure to read Precaution thoroughly before servicing (Click here).
  2. If the side airbag has deployed, replace the front seat assembly with a new one.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT SEAT ASSEMBLY
for Manual Seat: (Click here)
for Power Seat: (Click here)

3. SEPARATE AIRBAG WIRE HARNESS (for Manual Seat)

  1. B172849
    Disengage the 2 hooks.

  1. C223328
    Disengage the claw and 4 clamps.


4. SEPARATE AIRBAG WIRE HARNESS (for Power Seat)

  1. B172849
    Disengage the 2 hooks.

  1. C223329
    Disengage the claw and 4 clamps.


5. REMOVE FRONT SEATBACK COVER WITH PAD

  1. w/ Seat Heater:

    1. C223330
      Disconnect the connector.

    2. Disengage the 2 clamps.

  1. B174628
    Remove the 3 hog rings.

  1. C223331
    Open the 2 fasteners.

  1. C223332
    Remove the 2 hog rings.

  1. B174630
    Disengage the 2 hooks.

  1. C223334E01
    Turn back the separate type front seatback cover.

  1. Remove the nut and disengage the hook to separate the separate type front seatback cover bracket.

  1. B172866
    Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the front seatback cover with pad from the front seat frame assembly with adjuster.


6. REMOVE FRONT SEAT AIRBAG ASSEMBLY

  1. C223333
    Disengage the 2 clamps and separate the airbag wire harness.

  1. Remove the 2 nuts and front seat airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.

← ON-VEHICLE INSPECTION (from Jul 2010)REMOVAL (Aug 2008 – Jun 2010) →