2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FUEL PUMP

  1. A091823
    Inspect fuel pump resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      0.2 to 3.0 Ω at 20°C (68°F)

  1. Inspect fuel pump operation.

    1. Apply battery voltage to both the terminals. Check that the pump operates.

      NOTICE:
      1. These tests must be done quickly (within 10 seconds) to prevent damage to the pump.
      2. Keep the fuel pump as far away from the battery as possible.
      3. Always do the switching at the battery side.

← DISASSEMBLY (from Jul 2010)REASSEMBLY (May 2007 – Jul 2008) →