REMOVAL
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
 |
- HINT:
- Remove engine assembly with transaxle (Click here).
| 2.
SEPARATE FRONT STABILIZER LINK ASSEMBLY LH |
 |
- Remove the nut and separate the front stabilizer link assembly LH.
- HINT:
- If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
| 3.
SEPARATE FRONT STABILIZER LINK ASSEMBLY RH |
 |
- HINT:
- Perform the same procedure as the LH side.
| 4.
REMOVE NO. 1 FRONT STABILIZER BRACKET LH |
 |
- Remove the 2 bolts and the No. 1 front stabilizer bracket LH from the front frame assembly.
| 5.
REMOVE NO. 1 FRONT STABILIZER BRACKET RH |
 |
- HINT:
- Perform the same procedure as the LH side.
| 6.
REMOVE FRONT STABILIZER BAR |
|
| 7.
REMOVE NO. 2 FRONT STABILIZER BRACKET LH |
 |
- Remove the No. 2 front stabilizer bracket LH from the front stabilizer bar bushing.
| 8.
REMOVE NO. 2 FRONT STABILIZER BRACKET RH |
 |
- HINT:
- Perform the same procedure for the LH side.
| 9.
REMOVE NO. 1 FRONT STABILIZER BAR BUSHING |
 |
Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.