Check if the other caller can hear your voice correctly.
OK:
Your voice can be heard correctly.
HINT:
The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
NG
REPLACE CELLULAR PHONE
OK
2. CHECK SETTINGS
Enter the "Call" screen.
Check if the "Mute" switch is not set to on.
OK:
"Mute" switch is not set to on.
Text in Illustration
*a
Example
NG
TURN MUTE SWITCH OFF
OK
3. CHECK MICROPHONE (OPERATION CHECK)
Enter the "Microphone&Voice Recognition Check" screen (Check Mic & Voice Recognition) (Click here).
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
HINT:
Voice can be recorded up to 5 seconds.
Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
OK:
All check results are normal.
Text in Illustration
*a
Microphone Input Level Meter
*b
Recording Switch
*c
Stop Switch
*d
Play Switch
*e
Recording Indicator
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)