2007-2013 Highlander Kluger · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE ACCELERATOR PEDAL ASSEMBLY

NOTICE:
  1. Avoid physical shock to the accelerator pedal assembly.
  2. Do not disassemble the accelerator pedal assembly.
  3. The accelerator pedal assembly does not require lubrication.
  4. Do not apply oil or other lubricants to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

  1. A171724E01
    Disconnect the accelerator pedal assembly connector.

  1. Remove the 2 nuts and accelerator pedal assembly.

← ON-VEHICLE INSPECTION (from May 2007)INSTALLATION (from May 2007) →