2007-2013 Highlander Kluger · Service Manual SECURITIES

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from May 2007


DESCRIPTION
  1. The transponder key ECU controls the vehicle's engine immobiliser system functions. Engine immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle's Data Link Connector 3 (DLC3).
    In some cases, a malfunction may be occurring in the engine immobiliser system even though the security indicator light is not illuminated.
    When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.


CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT BATTERY VOLTAGE
  1. Measure the battery voltage.

    Standard voltage:
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

← TERMINALS OF ECU (from Jul 2010)DTC CHECK / CLEAR (from May 2007) →