2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE AIR CONDITIONING UNIT
(Click here)

2. REMOVE BLOWER ASSEMBLY

  1. E151015
    Disconnect the connector.

  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the blower assembly.


3. REMOVE COOLER EXPANSION VALVE

  1. E151024
    Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.


4. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. E151025
    Disconnect the connector.

  1. Remove the 6 screws.

  1. Disengage the 5 claws and remove the plate cover.

  1. E151026
    Disengage the clamp and remove the No. 1 cooler evaporator sub-assembly with the No. 1 cooler thermistor.

  1. E151027
    Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.


5. REMOVE NO. 1 COOLER THERMISTOR

  1. E151028
    Remove the No. 1 cooler thermistor.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →