ON-VEHICLE INSPECTION
Inspection · Vehicles built from May 2007
| INSPECT WINDSHIELD DEICER RELAY (Marking: DEICER) |
Measure the resistance of the relay. Measure the resistance according to the value(s) in the table below.

If the result is not as specified, replace the relay.Standard resistance Tester Connection
Condition
Specified Condition
3 - 5
Voltage is not applied between terminals 1 and 2
10 kΩ or higher
3 - 5
Apply battery voltage between terminals 1 and 2
Below 1 Ω
