2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Poor Sound Quality in All Modes (Low Volume)

Circuit diagnosis · Vehicles built from Jul 2010

INSPECTION PROCEDURE


1. CHECK AUDIO SETTINGS

  1. E176596E06
    Enter the "Sound Settings" screen by pressing the "Sound" switch on the audio display.

  1. Set "Bass", "Mid" and "Treble" to the initial values and check that sound is normal.

    OK:
    Malfunction disappears.

    HINT:
    Sound quality adjustment measures vary according to the type of the amplifier.

Text in Illustration 
*a
Example


NG
Go to step 2
OK

END

2. COMPARE WITH ANOTHER VEHICLE OF SAME MODEL
  1. Compare with another vehicle of the same model.

    1. Compare with another vehicle of the same model which does not have trouble to see if there is any difference in the sound quality.

      OK:
      No difference is found.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END


← Screen Flicker or Color Distortion (from Jul 2012)Vehicle Position Mark Deviates Greatly (Jul 2010 – Jun 2012) →