2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Screen Flicker or Color Distortion

Circuit diagnosis · Vehicles built from Jul 2012

Versions by build date: Jul 2010 – Jun 2012 from Jul 2012

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING

  1. E176542E07
    Enter the display adjustment screen by pressing the "DISP" switch.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.

Text in Illustration 
*a
Example


NG
Go to step 2
OK

END

2. CHECK CABIN
  1. Check that the temperature in the cabin is neither -20°C (-4°F) or lower nor 65°C (149°F) or higher.

    HINT:
    The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

    OK:
    Temperature in the cabin is between -20°C (-4°F) and 65°C (149°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3. CHECK COLOR BAR (OPERATION CHECK)

  1. E176520
    Enter the "Color Bar Check Mode" screen. Refer to Check Color Bar in Operation Check (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Screen Flicker or Color Distortion (Jul 2010 – Jun 2012)Poor Sound Quality in All Modes (Low Volume) (from Jul 2010) →