U0073 Control Module Communication Bus OFF
Diagnostic trouble codes · Vehicles built from Jul 2012
Also covers:
- U0100 Lost Communication with ECM / PCM "A"
- U0129 Lost Communication with Brake System Control Module
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 Jul 2010 – Jun 2012 from Jul 2012
DESCRIPTION
The power steering ECU receives signals from the ECM and the skid control ECU via the CAN communication system.| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0073 |
Control module communication bus off |
CAN communication system |
| U0100 |
Lost communication with ECM/PCM "A" |
|
| U0129 |
Lost communication with brake system control module |
|
- HINT:
- When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.
- If DTC U0100 is output, first erase the DTCs. Then turn the ignition switch from off to on (IG). If DTC U0100 is not output again, there is no malfunction.
- When 2 or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.
WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. RECONFIRM DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC is not output.
|
|
||||
| OK | ||
| ||
