Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 1 parking brake shoe assembly from the backing plate.
9.
REMOVE PARKING BRAKE SHOE STRUT
Remove the parking brake shoe strut and the parking brake shoe strut compression spring.
10.
SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY
Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 2 parking brake shoe assembly from the backing plate.
11.
REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET
Remove the parking brake shoe adjusting screw set.
12.
REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY
Separate the No. 2 parking brake shoe return tension spring and remove the No. 1 parking brake shoe assembly.
13.
REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING
Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.
14.
REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER
Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.
NOTICE:
Be careful not to damage the No. 3 parking brake cable assembly.
15.
REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.
Remove the 2 bolts, 4 nuts, and the No. 3 parking brake cable assembly.
16.
REMOVE CABLE SUPPORT BRACKET
Remove the cable support bracket from the No. 3 parking brake cable assembly.
17.
REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Remove the 2 bolts and separate the No. 2 parking brake cable assembly from the backing plate.
Remove the 2 bolts, 5 nuts, and the No. 2 parking brake cable assembly.
18.
REMOVE PARKING BRAKE CABLE SUPPORT BRACKET
Remove the parking brake cable support bracket from the No. 2 parking brake cable assembly.
19.
REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET
Remove the No. 1 parking brake cable support bracket from the No. 2 parking brake cable assembly.