Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 clips on the front of the V-bank cover sub-assembly. Continue rising the V-bank cover sub-assembly to disengage the clip on the rear of the V-bank cover sub-assembly and remove the V-bank cover sub-assembly.
NOTICE:
Attempting to disengage both front and rear clips at the same time may cause the V-bank cover sub-assembly to break.
2.
REMOVE ENGINE UNDER COVER ASSEMBLY
Remove the 2 bolts and engine under cover assembly RR.
Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.
3.
REMOVE NO. 1 ENGINE UNDER COVER
Remove the 6 bolts, 2 clips and No. 1 engine under cover.
4.
DRAIN ENGINE COOLANT
NOTICE:
Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Loosen the radiator drain cock plug.
Loosen the cylinder block drain cock plug. (for Bank 1)
Loosen the cylinder block drain cock plug. (for Bank 2, w/ Cylinder Block Drain Cock Plug)