REMOVAL
Removal / installation · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag) |
 |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE FRONT SEAT HEADREST ASSEMBLY |
|
| 3.
REMOVE FRONT OUTER SEAT TRACK COVER |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 4.
REMOVE FRONT INNER SEAT TRACK COVER |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 5.
REMOVE REAR OUTER SEAT TRACK COVER |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 6.
REMOVE REAR INNER SEAT TRACK COVER |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 7.
REMOVE FRONT SEAT ASSEMBLY |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 8.
REMOVE RECLINING ADJUSTER RELEASE HANDLE |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 9.
REMOVE FRONT SEAT CUSHION SHIELD |
 |
- Disengage the 2 hooks.
- Remove the 2 screws.
- Disengage the claw and 2 guides, and remove the front seat cushion shield.
| 10.
REMOVE FRONT SEAT INNER BELT ASSEMBLY |
 |
Disconnect each connector and clamp.
- Remove the nut and the front seat inner belt assembly.
| 11.
REMOVE FRONT SEAT CUSHION INNER SHIELD |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 12.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
 |
- w/ Front Seat Side Airbag:
Disengage the 4 clamps.
- Disconnect the occupant detection sensor connector as shown in the illustration.
- Disengage the 4 hooks.
- Remove the 2 clips and the separate type front seat cushion cover with pad.
Disengage each hook and remove the separate type front seat cushion cover with pad.


| 13.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD |
 |
- Remove the 2 hog rings.
- Remove the 15 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.