2007-2013 Highlander Kluger · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT SEAT HEADREST ASSEMBLY

3. REMOVE FRONT OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


4. REMOVE FRONT INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


5. REMOVE REAR OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


6. REMOVE REAR INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


7. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side (Click here).


8. REMOVE RECLINING ADJUSTER RELEASE HANDLE

HINT:
Use the same procedure for the RH side and the LH side (Click here).


9. REMOVE FRONT SEAT CUSHION SHIELD

  1. B170889
    Disengage the 2 hooks.

  1. B170913
    Remove the 2 screws.

  1. B170888
    Disengage the claw and 2 guides, and remove the front seat cushion shield.


10. REMOVE FRONT SEAT INNER BELT ASSEMBLY
  1. Disconnect each connector and clamp.

  1. B171041
    Remove the nut and the front seat inner belt assembly.


11. REMOVE FRONT SEAT CUSHION INNER SHIELD

HINT:
Use the same procedure for the RH side and the LH side (Click here).


12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

  1. B170890
    w/ Front Seat Side Airbag:

    1. Disengage the 4 clamps.

  1. B170900
    Disconnect the occupant detection sensor connector as shown in the illustration.

  1. B170891
    Disengage the 4 hooks.

  1. B170892
    Remove the 2 clips and the separate type front seat cushion cover with pad.

  1. Disengage each hook and remove the separate type front seat cushion cover with pad.

    B170975


13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

  1. B170893
    Remove the 2 hog rings.

  1. B170895
    Remove the 15 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →