2007-2013 Highlander Kluger · Service Manual SECURITIES

B279C Theft Deterrent System Presence Detection

Diagnostic trouble codes · Vehicles built from Jul 2010

DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.
DTC No.
DTC Detection Condition
Trouble Area
B279C
An ECM that is incompatible with engine immobiliser system is installed.
ECM

INSPECTION PROCEDURE

NOTICE:
If the ECM is replaced, register the ECU communication ID.


1. CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs.

    OK:
    DTC B279C is not output.



NG
REPLACE ECM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B279A Theft Deterrent System Communication Line High Fixation (from Jul 2010)Security Indicator Light Circuit (May 2007 – Jul 2008) →