ADJUSTMENT
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT |
Check the brake pedal height.
Turn back the carpet.

Text in Illustration *1
Stop Light Switch Assembly
*2
Clevis Lock Nut
*3
Front Floor Footrest (for LHD)
No. 2 Dash Panel Insulator Pad (for RHD)
*a
Brake Pedal Height
Measure the shortest distance between the brake pedal surface and front floor footrest (for LHD) or No. 2 dash panel insulator pad (for RHD).
Pedal height (for LHD: from front floor footrest, for RHD: from No. 2 dash panel insulator pad) Model
Specified Condition
LHD
148.8 to 158.8 mm (5.858 to 6.252 in.)
RHD
165.9 to 175.9 mm (6.531 to 6.925 in.)
Adjust the brake pedal height.
Disconnect the stop light switch connector.
Remove the stop light switch assembly.
Loosen the push rod clevis lock nut.
Adjust the brake pedal height by turning the push rod.
Tighten the push rod clevis lock nut.
- Torque:
- 26 N*m{ 265 kgf*cm , 19 ft.*lbf }
Install and adjust the stop light switch (Click here).
- NOTICE:
- Do not depress the brake pedal.
Connect the stop light switch connector.
| 2. INSPECT BRAKE PEDAL FREE PLAY |
Stop the engine. Depress the pedal several times until no vacuum is left in the brake booster. Release the brake pedal.

Depress the pedal until a slight resistance is felt. Measure the distance as shown in the illustration.
- Pedal free play:
- 1.0 to 6.0 mm (0.039 to 0.236 in.)
| 3. INSPECT BRAKE PEDAL RESERVE DISTANCE |
- HINT:
- Measure the distance at the same point used for the brake pedal height inspection.
Release the parking brake.
With the engine running, depress the brake pedal and measure the pedal reserve distance as shown in the illustration.

Text in Illustration *1
Front Floor Footrest (for LHD)
No. 2 Dash Panel Insulator Pad (for RHD)
*a
Pedal Reserve Distance
- Pedal reserve distance at 500 N (51 kgf, 112 lbf) (for LHD: from front floor footrest, for RHD: from No. 2 dash panel insulator pad):
Model
Specified Condition
LHD
84.4 mm (3.32 in.)
RHD
97.8 mm (3.85 in.)
