2007-2013 Highlander Kluger · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION COVER)

  1. B156681E04
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    The passenger seat is occupied
    Below 100 Ω
    1 - 3
    The passenger seat is not occupied
    1 MΩ or higher

    If the result is not as specified, replace the occupant detection sensor.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →