2007-2013 Highlander Kluger · Service Manual COMMUNICATION SYSTEM

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      HINT:
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT

    3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Using the intelligent tester, inspect the CAN communication function to ensure there are no malfunctions in the communication system.

      Result:
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B


    B.
    A

    4.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
    1. Using the intelligent tester, inspect the LIN communication function to ensure there are no malfunctions in the communication system (Click here).

      Result:
      Result
      Proceed to
      No DTCs output (LIN communication error does not occur.)
      A
      No DTCs output (LIN communication error occurs.)
      B
      DTCs output
      C


    B.

    C.
    A

    5.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. DATA LIST/ACTIVE TEST (Click here)

    2. Terminals of ECU (Click here)

    NEXT

    6.ADJUST, REPAIR OR REPLACE
      NEXT

      ← HOW TO PROCEED WITH TROUBLESHOOTING (May 2007 – Jul 2008)HOW TO PROCEED WITH TROUBLESHOOTING (from Jul 2010) →