DISASSEMBLY
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE HOOD TO RADIATOR SUPPORT SEAL |
 |
- Remove the 8 clips and hood to radiator support seal.
| 2.
REMOVE HOOD INSULATOR |
 |
- Using a clip remover, remove the 8 clips and the hood insulator.
| 3.
REMOVE WASHER NOZZLE SUB-ASSEMBLY
|
 |
- Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
- NOTICE:
- Be careful not to damage the windshield.
- HINT:
- Tape the screwdriver tip before use.
- Remove the washer nozzle sub-assembly from the washer hose.
- NOTICE:
- Washer nozzles cannot be reused.
| 4.
DISCONNECT WASHER HOSE ASSEMBLY |
 |
- Disconnect the washer hose assembly.