2007-2013 Highlander Kluger · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER APRON SEAL RH

  1. A171853
    Remove the 2 bolts, clip and front fender apron seal RH.


3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

  1. A170012E01
    Disconnect the wiring harness protector.

  1. Disconnect the oil pressure switch assembly connector.

  1. A170011
    Using a 24 mm deep socket wrench, remove the oil pressure switch assembly.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →