DISASSEMBLY
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)
|
 |
- Remove the 2 screws.
Disconnect the connector.
- Remove the cruise control main switch as shown in the illustration.
| 2.
REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)
|
 |
- Disconnect the pad switch connector from the spiral cable.
Remove the screw.
Disengage the 2 pins and remove the steering pad switch.
- Remove the screw.
Disengage the 2 pins and remove the steering pad switch assembly.
| 3.
REMOVE NO. 2 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch) |
 |
- Remove the screw.
- Disengage the 2 pins to remove the No. 2 steering wheel ornament from the steering wheel spoke sub-assembly.
| 4.
REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch) |
 |
- HINT:
- Perform the same procedure as for the No. 2 steering wheel ornament.
| 5.
REMOVE LOWER STEERING WHEEL BOSS COVER |
 |
- Remove the 2 screws.
- Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel spoke sub-assembly.
| 6.
REMOVE STEERING PAD ATTACHING SCREW |
 |
- Remove the 2 steering pad attaching screws from the lower steering wheel boss cover.