2007-2013 Highlander Kluger · Service Manual STEERING

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE CRUISE CONTROL MAIN SWITCH

  1. E150160
    Remove the 2 screws.

  1. Disconnect the connector.

  1. E150161
    Remove the cruise control main switch as shown in the illustration.


2. REMOVE STEERING PAD SWITCH ASSEMBLY

  1. E150585
    Disconnect the pad switch connector from the spiral cable.

  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch.

  1. E150586
    Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch assembly.


3. REMOVE LOWER STEERING WHEEL BOSS COVER

  1. C165712
    Remove the 2 screws.

  1. C165713
    Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.


4. REMOVE STEERING PAD ATTACHING SCREW

  1. C165714
    Remove the 2 steering pad attaching screws from the lower steering wheel boss cover.

← DISASSEMBLY (Aug 2008 – Jun 2010)REASSEMBLY (May 2007 – Jul 2008) →