REASSEMBLY
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL STEERING PAD ATTACHING SCREW |
 |
- Install the 2 steering pad attaching screws to the lower steering wheel boss cover.
| 2.
INSTALL LOWER STEERING WHEEL BOSS COVER |
 |
- Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel spoke sub-assembly.
- Install the 2 screws.
| 3.
INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)
|
 |
- Engage the 2 pins and install the steering pad switch.
Install the screw.
-
Torque:
- 2.4 N*m{
24 kgf*cm
, 21 in.*lbf
}
- Engage the 2 pins and install the steering pad switch assembly.
Install the screw.
-
Torque:
- 2.4 N*m{
24 kgf*cm
, 21 in.*lbf
}
Connect the pad switch connector to the spiral cable.
| 4.
INSTALL NO. 2 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch) |
 |
- Engage the 2 pins to install the No. 2 steering wheel ornament to the steering wheel spoke sub-assembly.
- Install the screw.
-
Torque:
- 2.4 N*m{
25 kgf*cm
, 21 in.*lbf
}
| 5.
INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch) |
 |
- HINT:
- Perform the same procedure as for the No. 2 steering wheel ornament.
| 6.
INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)
|
 |
- Install the cruise control main switch as shown in the illustration.
Connect the connector.
- Install the 2 screws.
-
Torque:
- 2.4 N*m{
25 kgf*cm
, 21 in.*lbf
}