2007-2013 Highlander Kluger · Service Manual STEERING

REASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL STEERING PAD ATTACHING SCREW

  1. C165714
    Install the 2 steering pad attaching screws to the lower steering wheel boss cover.


2. INSTALL LOWER STEERING WHEEL BOSS COVER

  1. C165713
    Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.

  1. C165712
    Install the 2 screws.


3. INSTALL STEERING PAD SWITCH ASSEMBLY

  1. E150586
    Engage the 2 pins and install the steering pad switch.

  1. Install the screw.

    Torque:
    2.4 N*m{ 24 kgf*cm , 21 in.*lbf }

  1. E150585
    Engage the 2 pins and install the steering pad switch assembly.

  1. Install the screw.

    Torque:
    2.4 N*m{ 24 kgf*cm , 21 in.*lbf }

  1. Connect the pad switch connector to the spiral cable.


4. INSTALL CRUISE CONTROL MAIN SWITCH

  1. E150162
    Install the cruise control main switch as shown in the illustration.

  1. Connect the connector.

  1. E150160
    Install the 2 screws.

    Torque:
    2.4 N*m{ 25 kgf*cm , 21 in.*lbf }

← REASSEMBLY (Aug 2008 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →