2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

  1. E150050
    Remove the 2 screws.

  1. Disengage the guide and remove the fog light assembly.


2. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.


3. REMOVE FOG LIGHT COVER LH

  1. B172765
    Disengage the 6 claws and remove the fog light cover LH.


4. REMOVE FOG LIGHT COVER RH

HINT:
Use the same procedure for the RH side and LH side.


5. REMOVE FRONT BUMPER HOLE COVER LH

  1. B172766
    Disengage the 2 claws and remove the hole cover LH.


6. REMOVE FRONT BUMPER HOLE COVER RH

HINT:
Use the same procedure for the RH side and LH side.


7. REMOVE FRONT BUMPER ENERGY ABSORBER

  1. B172767
    Disengage the 2 guides and remove the front bumper energy absorber.


8. REMOVE FRONT BUMPER REINFORCEMENT

  1. B172768
    Remove the 6 bolts and front bumper reinforcement.


9. REMOVE FRONT BUMPER STAY LH

  1. B172769
    Remove the bolt and screw.

  1. Disengage the 2 claws and remove the front bumper stay LH.


10. REMOVE FRONT BUMPER STAY RH

HINT:
Use the same procedures for the RH side and LH side.

← REMOVAL (from Jul 2010)DISASSEMBLY (from Jul 2010) →