DISASSEMBLY
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE FRONT FENDER LINER RETAINER |
 |
- Disengage the 2 claws and remove the 2 front fender liner retainers.
- HINT:
- Use the same procedure for the RH side and LH side.
| 2.
REMOVE FOG LIGHT COVER LH |
 |
- Disengage the claw and remove the outside moulding retainer.
- Disengage the 7 claws, guide and remove the fog light cover LH.
| 3.
REMOVE FOG LIGHT COVER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 4.
REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
|
 |
- Using a screwdriver, disengage the claw (A).
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective Tape
|
Disengage the 2 claws (B) and pin, and remove the fog light assembly.
| 5.
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure as for the LH side.
| 6.
REMOVE FRONT BUMPER HOLE COVER LH |
 |
- Disengage the 2 claws and remove the hole cover LH.
| 7.
REMOVE FRONT BUMPER HOLE COVER RH |
 |
- HINT:
- Use the same procedure as for the LH side.
| 8.
REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY |
 |
- Disengage the 18 claws and remove the lower radiator grille sub-assembly.
| 9.
REMOVE FRONT BUMPER MOULDING |
 |
- Remove the 3 screws.
Disengage the 4 claws and remove the front bumper moulding.
| 10.
REMOVE FRONT BUMPER ENERGY ABSORBER |
 |
- Disengage the 2 guides and remove the front bumper energy absorber.
| 11.
REMOVE FRONT BUMPER REINFORCEMENT |
 |
- Remove the 6 bolts and front bumper reinforcement.
| 12.
REMOVE FRONT BUMPER STAY LH |
 |
- Remove the bolt and screw.
Disengage the 2 claws and remove the front bumper stay LH.
| 13.
REMOVE FRONT BUMPER STAY RH |
 |
- HINT:
- Use the same procedure as for the LH side.