2007-2013 Highlander Kluger · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL FRONT BUMPER STAY LH

  1. B172769E01
    Engage the 2 claws and install the front bumper stay LH.

  1. Install the bolt and screw.

    Torque:
    Bolt:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
    Screw:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL FRONT BUMPER STAY RH

HINT:
Use the same procedures for the RH side and LH side.


3. INSTALL FRONT BUMPER REINFORCEMENT

  1. B172768
    Install the front bumper reinforcement with the 6 bolts.

    Torque:
    64 N*m{ 653 kgf*cm , 47 ft.*lbf }


4. INSTALL FRONT BUMPER ENERGY ABSORBER

  1. B172767
    Engage the 2 guides and install the front bumper energy absorber.


5. INSTALL FRONT BUMPER HOLE COVER LH

  1. B172766
    Engage the 2 claws and install the front bumper hole cover LH.


6. INSTALL FRONT BUMPER HOLE COVER RH

HINT:
Use the same procedure for the RH side and LH side.


7. INSTALL FOG LIGHT COVER LH

  1. B172765
    Engage the 6 claws and install the fog light cover LH.


8. INSTALL FOG LIGHT COVER RH

HINT:
Use the same procedure for the RH side and LH side.


9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

  1. E150050
    Engage the guide.

  1. Install the fog light assembly with the 2 screws.


10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.

← DISASSEMBLY (from Jul 2010)REASSEMBLY (from Jul 2010) →