2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE REAR QUARTER PANEL MUDGUARD LH

  1. B261562E01
    Remove the 2 screws (A).

  1. Using a 4 mm hexagon wrench, remove the 3 screws (B).


2. REMOVE REAR QUARTER PANEL MUDGUARD RH

HINT:
Use the same procedure for the RH side and LH side.


3. REMOVE REAR BUMPER ASSEMBLY

  1. B256712E01
    Put protective tape around the rear bumper assembly.
    Text in Illustration 
    *1
    Protective Tape

  1. B263957
    Remove the 2 screws.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. B256713
    Remove the 5 clips, 2 screws and 2 bolts.

  1. B256710
    Disengage the 7 claws and disconnect the rear bumper assembly.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. w/ Rear Fog Light:

    1. Disconnect the rear fog light connector, and remove the rear bumper assembly.

← REMOVAL (May 2007 – Jun 2010)DISASSEMBLY (May 2007 – Jun 2010) →