2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

  1. E147127E01
    Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

    NOTICE:
    Be careful not to damage the windshield.

    HINT:
    Tape the screwdriver tip before use.

  1. E128831
    Remove the washer nozzle sub-assembly from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.

← ON-VEHICLE INSPECTION (from May 2007)ADJUSTMENT (from May 2007) →