2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE NO. 1 HEATER TO REGISTER DUCT

  1. B168378
    Remove the 3 screws <E> and the No. 1 heater to register duct.


2. REMOVE NO. 4 HEATER TO REGISTER DUCT

  1. B168379
    Remove the 3 screws <E> and the No. 4 heater to register duct.


3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT

  1. B168380
    Remove the screw <E> and the side No. 1 defroster nozzle duct.


4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT

  1. B168381
    Remove the screw <E> and the side No. 2 defroster nozzle duct.


5. REMOVE DEFROSTER NOZZLE ASSEMBLY

  1. B173016
    Remove the clip.

  1. Remove the 3 screws <E> and the defroster nozzle assembly.


6. REMOVE CENTER HEATER TO REGISTER SUB DUCT

  1. B168382
    Remove the 2 screws <E> and the center heater to register sub duct.


7. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B168383
    Remove the 3 screws <E> and the No. 1 instrument panel register assembly.


8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B168384
    Remove the 3 screws <E> and the No. 2 instrument panel register assembly.


9. REMOVE NAVIGATION ANTENNA ASSEMBLY

  1. E150590
    Remove the 2 screws and separate the navigation antenna assembly.

  1. E150591
    Disengage the 3 clamps and remove the navigation antenna assembly.


10. REMOVE ANTENNA CORD SUB-ASSEMBLY

  1. Disengage the 9 clamps and remove the antenna cord sub-assembly.

    E151137E01


11. REMOVE NO. 4 INSTRUMENT PANEL WIRE (for LHD)

  1. B168385
    Disconnect the connector.

  1. Disengage the 5 clamps and remove the No. 4 instrument panel wire.


12. REMOVE NO. 4 INSTRUMENT PANEL WIRE (for RHD)

  1. B168386
    Disconnect the connector.

  1. Disengage the 5 clamps and remove the No. 4 instrument panel wire.


13. REMOVE COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)

  1. B172998
    Disengage the 2 claws and remove the cooler switch hole cover.


14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
  1. Disconnect the connector.

  1. E150082
    Disengage the 2 claws and remove the automatic light control sensor.


15. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

  1. C165104
    Remove the 2 screws.

  1. C165105
    Disengage the 5 hooks.

  1. C165106
    Disengage the 5 hooks and remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.

← DISASSEMBLY (Aug 2008 – Jun 2010)REASSEMBLY (May 2007 – Jul 2008) →