2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)

2. REMOVE VANITY LIGHT ASSEMBLY

  1. B175184E01
    Disengage the 2 claws <A> and separate the bulb holder from the vanity light assembly as shown in the illustration.

  1. Disengage the claw <B> and remove the vanity light assembly.

    HINT:
    Use the same procedure to remove the light on the other side.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →