2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL SOLAR SENSOR

  1. E150082
    Engage the 2 claws and install the solar sensor.

  1. Connect the connector.


2. INSTALL DEFROSTER NOZZLE ASSEMBLY

  1. B173016
    Install the defroster nozzle assembly with the 3 screws <E> and clip.


3. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

  1. B168381
    Install the side No. 2 defroster nozzle duct with the screw <E>.


4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

  1. B168380
    Install the side No. 1 defroster nozzle duct with the screw <E>.


5. INSTALL NO. 4 HEATER TO REGISTER DUCT

  1. B168379
    Install the No. 4 heater to register duct with the 3 screws <E>.


6. INSTALL NO. 1 HEATER TO REGISTER DUCT

  1. B168378
    Install the No. 1 heater to register duct with the 3 screws <E>.


7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)
← INSTALLATION (Aug 2008 – Jun 2010)ON-VEHICLE INSPECTION (from May 2007) →