DISASSEMBLY
Removal / installation · Vehicles built from May 2007
| 1. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY |
Remove the bolt and the rear No. 1 seat inner belt assembly.

| 2. REMOVE REAR SEAT RECLINING UPPER COVER |
Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.

| 3. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE |
Remove the 3 screws and remove the No. 1 reclining adjuster release handle.

| 4. REMOVE SEAT ADJUSTER COVER CAP |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.

| 5. REMOVE REAR SEAT CUSHION MOULDING LH |
Remove the 2 screws.

Disengage the 4 claws.
Disengage the guide and remove the rear seat cushion moulding LH.
| 6. REMOVE REAR SEAT CUSHION MOULDING RH |
Remove the screw.

Disengage the 5 claws.
Disengage the guide and remove the rear seat cushion moulding RH.
| 7. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD |
Disengage the 2 hooks.

Disengage the 2 hooks.

Remove the 2 hog rings.
Separate the 3 buttons.

Disengage the 12 hooks.

Remove the 4 hog rings and the rear No. 1 seat cushion cover with pad.

| 8. REMOVE NO. 1 REAR SEAT COVER LH |
Disengage the 2 hooks and remove the No. 1 rear seat cover LH.

| 9. REMOVE NO. 1 REAR SEAT COVER RH |
Disengage the 4 hooks and remove the No. 1 rear seat cover RH.

| 10. REMOVE NO. 2 REAR SEAT COVER |
Disengage the 2 hooks and remove the No. 2 rear seat cover.

| 11. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER |
Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.

| 12. REMOVE NO. 1 REAR SEAT ARMREST CAP |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 rear seat armrest cap.

| 13. REMOVE REAR SEAT ARMREST ASSEMBLY |
Remove the bolt, washer, wave washer and the rear seat armrest assembly.

| 14. REMOVE TONNEAU COVER HOOK HOLDER |
Remove the 2 screws and the 2 tonneau cover hook holders.

| 15. REMOVE REAR SEATBACK COVER |
Disengage the 4 claws and remove the rear seatback cover.

| 16. REMOVE RECLINING REMOTE CONTROL LEVER KNOB (w/ Rear No. 2 Seat) |
Remove the screw and the reclining remote control lever knob as shown in the illustration.

| 17. REMOVE REAR SEAT LOCK STRIKER COVER CAP (w/ Rear No. 2 Seat) |
Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the 2 rear seat lock striker cover caps.

| 18. REMOVE NO. 1 REAR SEATBACK LOCK STRIKER COVER (w/ Rear No. 2 Seat) |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 rear seatback lock striker cover.

| 19. REMOVE NO. 1 REAR SEAT BEZEL COVER (w/ Rear No. 2 Seat) |
Remove the 3 screws and the No. 1 rear seat bezel cover.

| 20. REMOVE REAR SEAT LOCK STRIKER COVER |
Using a screwdriver wrapped with protective tape, disengage the claw.

Disengage the guide and remove the rear seat lock striker cover.
| 21. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY |
Remove the 2 screws.

Disengage the guide.
Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.


| 22. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/o Rear No. 2 Seat) |
Disengage the 20 claws as shown in the illustration.

Disengage the 2 clips.
Disengage the 2 guides and remove the rear seatback board carpet assembly.
| 23. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/ Rear No. 2 Seat) |
Disengage the 18 claws as shown in the illustration.

Disengage the 2 clips.
Disengage the 2 guides and remove the rear seatback board carpet assembly.
| 24. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.

| 25. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.

| 26. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat) |
Disengage the hook and remove the rear No. 1 seatback cover with pad.

| 27. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w/ Rear No. 2 Seat) |
Disengage the hook.

Remove the 2 hog rings and the rear No. 1 seatback cover with pad.
| 28. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER |
Remove the 10 hog rings and the separate type rear No. 1 seatback cover.

| 29. REMOVE REAR SEAT RECLINING INNER PROTECTOR |
Disengage the claw and remove the rear seat reclining inner protector.

| 30. REMOVE REAR SEAT RECLINING INNER REAR COVER |
Remove the screw.

Disengage the claw and remove the rear seat reclining inner rear cover.
| 31. REMOVE REAR SEAT RECLINING INNER FRONT COVER |
Remove the screw and the rear seat reclining inner front cover.

| 32. REMOVE REAR SEATBACK INNER COVER |
Remove the 2 screws.

Disengage the claw and remove the rear seatback inner cover.
| 33. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
Disengage the claw.

Disengage the guide and remove the reclining adjuster inside cover RH.
| 34. REMOVE NO. 1 REAR SEAT RECLINING COVER |
Remove the screw.

Disengage the 2 guides and remove the No. 1 rear seat reclining cover.
| 35. REMOVE NO. 1 REAR SEAT COVER |
Disengage the hook and remove the No. 1 rear seat cover.

| 36. REMOVE SEAT ADJUSTER CONTROL CABLE ASSEMBLY |
Disengage the hook and separate the seat adjuster control cable assembly with the rear seat hook.


Disconnect the 2 cable clamps.
Disengage the claw and remove the seat adjuster control cable assembly.
| 37. REMOVE REAR SEAT HOOK |
Disengage the claw and remove the rear seat hook.

| 38. REMOVE SEAT TRACK CONTROL CABLE ASSEMBLY |
Remove the 2 clamps.

Disconnect the 2 cable clamps and remove the seat track control cable assembly.
| 39. REMOVE REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/o Rear No. 2 Seat) |
Disconnect the 4 cable clamps and remove the rear seat reclining control cable sub-assembly.

| 40. REMOVE REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/ Rear No. 2 Seat) |
Remove the clamp.


Disconnect the 6 cable clamps and remove the rear seat reclining control cable sub-assembly.
| 41. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY |
Using a T45 "TORX" socket, remove the 4 "TORX" bolts, bushes, and the rear seat cushion spring assembly.

| 42. REMOVE REAR SEATBACK LOCK CONTROL LEVER SUB-ASSEMBLY |
Remove the 2 nuts.

Disengage the guide and remove the rear seatback lock control lever sub-assembly.
| 43. REMOVE REAR SEATBACK STOPPER SUB-ASSEMBLY |
Disconnect the 4 cable clamps.


Remove the nut and the rear seatback stopper sub-assembly.

