ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| INSPECT REAR SPEAKER ASSEMBLY |
With the speaker installed, check that there is no looseness or other abnormalities.
Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.
Measure the resistance of the speaker.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Always
3.2 to 4.8 Ω
Text in Illustration *a
Component without harness connected
(Rear Speaker Assembly)
