2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

B15B8 Harddisk Malfunction

Diagnostic trouble codes · Vehicles built Jul 2010 – Jun 2012

Versions by build date: Jul 2010 – Jun 2012 from Jul 2012

DESCRIPTION

This DTC is stored when the hard disk drive which is built into the navigation receiver assembly has an initialization malfunction or read/write errors occur more than a specified number of times.
DTC No.
DTC Detection Condition
Trouble Area
B15B8
Hard Disk Drive (HDD) malfunction
Navigation receiver assembly

INSPECTION PROCEDURE


1. CHECK HARD DISK DRIVE (OPERATION CHECK)

  1. E181026E11
    Enter the "Failure Diagnosis" screen. Refer to Check Hard Disk Drive in Operation Check (Click here).

  1. Select "HDD Check" and check the result.

    OK:
    "OK" is displayed.

    HINT:
    After "HDD Check" is selected, it may take a while until the result is displayed.

    Text in Illustration 
    *a
    Result



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


2. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.

    HINT:
    The hard disk drive may be malfunctioning even if DTC B15B8 is not output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B15A0 LAN Master Malfunction (+ 5 more codes) (from Jul 2010)B15B8 Harddisk Malfunction (from Jul 2012) →