FRONT SEAT SIDE AIRBAG ASSEMBLY > DISPOSAL |
| 1. PRECAUTION |
| 2. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST .
Refer to PRECAUTION (Click here).
Disconnect the cable from the negative battery terminal.
Install SST.
Disconnect the airbag connector (yellow colored one) from the front seat side airbag assembly under the seat.
![]() |
Connect the SST connector to the front seat side airbag assembly connector.
![]() |
Move SST at least 10 m (33 ft.) away from the vehicle front side window.
Maintaining sufficient clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.
Press the SST activation switch and deploy the airbag.
| 3. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check the function of SST .
Remove the front seat side airbag assembly.
Remove the front seat assembly (Click here for Manual seat, Click here for Power seat).
Remove the 2 nuts and the front seat side airbag assembly from the seatback assembly (Click here for Manual seat, Click here for Power seat).
![]() |
Using braided wire, tie down the front seat side airbag assembly to an unneeded tire.
![]() |
Install the 2 nuts to the front seat side airbag assembly.
![]() |
Wind the wires around the stud bolts of the front seat side airbag assembly as shown in the illustration.
![]() |
Position the front seat side airbag assembly inside the tire.
Install SST.
![]() |
Connect the SST connector to the front seat side airbag assembly connector.
![]() |
Place the tires.
Place at least 2 tires under the tire which the front seat side airbag assembly is tied to.
Place at least 2 tires over the tire which the front seat side airbag assembly is tied to. The top tire should have a wheel installed.
![]() |
Tie the tires together with the 2 wires.
Install SST.
![]() |
Connect the SST connector.
Move SST at least 10 m (33 ft.) away from the airbag tied down to the tire.
Deploy the airbag.
Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
Check that no one is within a 10 m (33 ft.) radius of the tire which the front seat side airbag assembly is tied to.
Press the SST activation switch and deploy the airbag.
![]() |
Dispose of the front seat side airbag assembly.
Remove the front seat side airbag assembly from the tire.
Place the front seat side airbag assembly in a plastic bag, tie it tightly, and dispose of it according to local regulations.