Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If a malfunction in the engine control system is detected, the operation of VSC and TRAC is prohibited by the fail safe function. When the signals from the engine are input normally, the fail safe control is cancelled and the DTC is not stored.

DTC Code
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 1 second or more.
Engine control system

INSPECTION PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
  1. Check if any engine control system DTC is output (Click here for 2GR-FE).

    Result:

    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
INSPECT ENGINE CONTROL SYSTEM (for 2GR-FE) (Click here)
A

REPLACE ECM (for 2GR-FE) (Click here)