AIR CONDITIONING SYSTEM (for Manual Air Conditioning System) > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK |
| |||||
| 3.INSPECT BATTERY VOLTAGE |
| |||||
| 4.CHECK CAN COMMUNICATION SYSTEM* |
Use Techstream to check if the CAN communication system is functioning.
| Result | Proceed to |
| CAN DTC is not output | A |
| CAN DTC is output | B (Click here) |
|
| ||||
| |||||
| 5.CHECK FOR DTC* |
Check for DTCs.
Write down the DTCs or sensor check codes.
Clear the DTCs or sensor check codes.
Check whether the DTCs or sensor check codes recur.
Reproduce the problem symptoms in accordance with the DTCs or sensor check codes that were written down, and check whether the DTCs or sensor check codes recur.
| Result | Proceed to |
| DTC or sensor check code is not output | A |
| DTC or sensor check code is output | B |
|
| ||||
| |||||
| 6.REFER TO PROBLEM SYMPTOMS TABLE |
| Result | Proceed to |
| Fault not listed in problem symptoms table | A |
| Fault listed in problem symptoms table | B |
|
| ||||
| |||||
| 7.OVERALL ANALYSIS AND TROUBLESHOOTING* |
DATA LIST / ACTIVE TEST (Click here)
Terminals of ECU (Click here)
| |||||
| 8.ADJUST, REPAIR OR REPLACE |
| |||||
| 9.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|